TAPEDESIGN Performance Shinguards 2.0
Application:
The shinguards are softened by hot air (hair dryer) and thus individually formable.
Place one of the two Shinguards on a smooth and clean surface (paper or baking paper). Heat it for 3 – 6 minutes. Wait 10 – 15 seconds before placing the shinguard on the desired position of your shin (directly on the skin). Now, with light pressure, shape the protector into the desired form. (If necessary with cling film)
After approx. 3 minutes the protector is hardened and has taken on the desired shape of the shin and the muscles.
Then repeat the process with the second schooner.
Perfect fit:
After heating, the shinguards have the property of assuming almost any shape. This has the advantage that any shape of the shin bone and musculature will be adopted exactly.
Important notes:
Store in a cool place after use and protect from direct sunlight. Failure to follow the instructions may result in product damage. We do not accept any liability for incorrect use.
Although the shinguards have been tested, please note that even the shinguards only protect up to a certain level of play hardness, but no shinguard can provide full protection from injury. If the size of the shinguards is changed, the protection level will decrease accordingly.
Shinguards can be easily cleaned with water and then dried. This can prevent the formation of unpleasant odors.
TAPEDESIGN Performance Shinguards 2.0 热可塑护腿板
使用说明：
- 护腿板将通过热空气（吹风机）软化，可根据您的腿型单独塑性
- 将一个护腿板、放在光滑干净的表面（白纸或烘焙纸）上
- 加热3-6分钟
- 等待 10 – 15 秒，然后将护腿板放在小腿的所需保护位置（直接放在皮肤上）
- 用轻微的压力将保护器塑造成所需的形状（必要时用保鲜膜）
- 大约3 分钟后，护腿板将会硬化并呈现出所需保护的胫骨和肌肉形状
- 然后在第二块护腿板上重复相同的步骤
完美契合：
加热后，护腿板具有几乎可以呈现任何形状的特性，根据这一特性优势，可以准确的覆盖任何形状的胫骨和肌肉组织，获得一副完美贴合双腿的定制化护腿板，在场上，守护您的双腿。
重要提示：
使用后存放于阴凉处，避免阳光直射。不遵守说明可能会导致产品损坏。我们不对错误使用承担任何责任。
虽然护腿板已经过测试考验，但请注意，即使护腿板也只能在高强度的比赛中提供一定程度上的保护，不能完全做到避免伤害的发生。如果护腿板的尺寸发生变化，防护等级会相应降低。
护腿板可以很容易地用水清洗，干燥。这可以防止形成难闻的气味。
| 颜色 | 白色, 黑色 |
|---|
